MODEL:IT-6100A |
Design standard | BS EN 13355:2004+A1:2009 BS EN 60204:2006+A1:2009 |
Dimension |
|
inside dimension | 6900×4000×2800mm (L×W×H) |
Outer dimension | 10670×4110×2800mm(L×W×H) |
Basement |
|
Design form | Galvanized sheet bending forming ,Full grids,high 350mm |
Carrying capacity of the grids | 650kg/Wheel |
Filter area | 27.6㎡ |
Drive-in-ramps | 2 ramps,Size:2000*520mm |
Grid description | Size:997*756mm , 40*3mm,galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of pressed steel grates. |
CABIN | / |
Wall paint | / |
PVC curtain | / |
Ceiling lights |
|
Pre-Filter | Fiberglass paint arrestor filter |
Ceiling filter | / |
Floor filtration | Fiberglass paint arrestor filter,it has the characteristics of large air permeability, low resistance and flammability. |
EXHAUST UNIT |
|
Exhaust fan type | Direct-type turbine fan |
Power and motor description | 1×7.5KW,970RPM,380V,50HZ;CE |
Parameters of exhaust | 28000m³/h ;650pa |
Ductwork |
|
Straight ducting | 4 piece |
90° elbow | 1 piece |
Reducer | 1 piece |
CONTROL SYSTEM |
|
Operative standard | Standard Y / Δ Step-down starting Control system |
Function | Fan start, emergency stop switch, fault indication |
SPECIAL DESCRIPTION PROJECT | RATED POWER:7.5KW |